Rear View Monitor System

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK TELEVISION CAMERA ASSEMBLY





(a) Disconnect the S35 camera connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the S35 camera connector.
(d) Measure the waveform according to the value(s) in the table below.





If the result is not as specified, the camera may have a malfunction.





(e) Using an oscilloscope, check waveform 1.






2. CHECK MULTI-DISPLAY Navigation System (for DVD)
3. CHECK DISPLAY AND NAVIGATION ASSEMBLY Navigation System (for HDD)