CD/DVD Sound Skips

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: CD/DVD Sound Skips

CD/DVD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. CLEAN DISC




(a) Clean the disc by wiping the disc's underside radially with a soft cloth.
OK:
Malfunction disappears.
NOTICE:
Do not use a conventional record cleaner or antistatic preservative.

NG -- REPLACE DISC WITH ANOTHER AND RECHECK
OK -- DISC WAS DIRTY
2. REPLACE DISC WITH ANOTHER AND RECHECK
(a) Replace the disc with a normal one and check if the same problem occurs again.
OK:
Malfunction disappears.
NG -- CHECK WHEN PROBLEM OCCURS
OK -- DISC IS FAULTY
3. CHECK WHEN PROBLEM OCCURS
(a) Check the location in which disc skipping occurs.

Result





B -- INSTALL MULTI-DISPLAY IN ANOTHER VEHICLE OF SAME MODEL AND COMPARE
A -- Continue to next step.
4. CHECK MULTI-DISPLAY INSTALLATION
(a) Check the installation condition of the multi-display.
OK:
Installed properly.
NG -- INSTALL MULTI-DISPLAY PROPERLY
OK -- Continue to next step.
5. INSTALL MULTI-DISPLAY IN ANOTHER VEHICLE OF SAME MODEL AND COMPARE
(a) Remove the multi-display and install it in another vehicle of the same model. Check if the disc sound skips.
OK:
Disc sound does not skip.
NG -- DID TEMPERATURE IN CABIN CHANGE RAPIDLY?
OK -- MALFUNCTIONS MAY NOT BE PRESENT
6. DID TEMPERATURE IN CABIN CHANGE RAPIDLY?
(a) Check whether or not a rapid temperature change occurred in the cabin.
OK:
Rapid temperature change occurred.
HINT: A rapid temperature change creates condensation inside the disc player, which may disable disc playback.

NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- CONDENSATION DUE TO TEMPERATURE CHANGE (LEAVE AS IS FOR A WHILE BEFORE USING)