Reassembly

EXTERIOR: REAR BUMPER: REASSEMBLY

REASSEMBLY

1. INSTALL NO. 1 ULTRASONIC SENSOR
(a) Install the No. 1 ultrasonic sensor Installation.
2. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
(a) Install the No. 1 ultrasonic sensor retainer Installation.
3. INSTALL NO. 3 LUGGAGE ROOM WIRE Installation





4. INSTALL REAR BUMPER EXTENSION LH
(a) Install the bumper extension with the 4 bolts.
Torque: 5.5 Nm (56 kgf-cm, 49in-lbf)
5. INSTALL REAR BUMPER EXTENSION RH
HINT: Use the same procedures described for the LH side.





6. INSTALL REAR BUMPER SIDE RETAINER LH
(a) Install the retainer with the 2 bolts.
Torque: 5.5 Nm (56 kgf-cm, 49in-lbf)
7. INSTALL REAR BUMPER SIDE RETAINER RH
HINT: Use the same procedures described for the LH side.





8. INSTALL REAR BUMPER PIECE LH
(a) Attach the 2 claws to install the bumper piece.
HINT: Attach the claw on the outer side first.

9. INSTALL REAR BUMPER PIECE RH
HINT: Use the same procedures described for the LH side.

10. INSTALL REAR BUMPER PROTECTOR
(a) Install 2 new bumper protectors.