Reassembly

EXTERIOR: RADIATOR GRILLE: REASSEMBLY

REASSEMBLY

1. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
(a) Clean the radiator grille surface.
(1) Using a heat light, heat the radiator grille surface.
Standard heating temperature:





NOTICE:
Do not heat the radiator grille and emblem excessively.
(2) Remove the double-sided tape from the radiator grille.
(3) Wipe off any tape adhesive residue with cleaner.





(b) Install a new emblem.
(1) Using a heat light, heat the radiator grille and emblem.
Standard heating temperature:





NOTICE:
Do not heat the radiator grille and emblem excessively.
(2) Remove the peeling paper from the face of the emblem.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Install the emblem.
2. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/ Pre-collision System)





(a) Attach the claw to install the emblem.





(b) Install the 2 spring nuts.
3. INSTALL RADIATOR GRILLE OUTSIDE





(a) Attach the 16 claws to install the radiator grill outside.
(b) Install the 2 clips.
4. INSTALL RADIATOR GRILLE PROTECTOR
(a) Clean the radiator grille surface.
(1) Using a heat light, heat the radiator grille surface.
Standard heating temperature:





NOTICE:
Do not heat the radiator grille and emblem excessively.
(2) Remove the double-sided tape from the radiator grille.
(3) Wipe off any tape adhesive residue with cleaner.
(b) If reusing the protector.
Clean the protector.
(1) Remove the double-sided tape from the protector.
(2) Wipe off any tape adhesive residue with cleaner.




(3) Apply new double-sided tape to the protector, as shown in the illustration.
(c) Install the protector.
(1) Remove the peeling paper from the face of the protector.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.




(2) Attach the 9 clips to install the protector.