Inspection

MIRROR: OUTER REAR VIEW MIRROR: INSPECTION

INSPECTION

1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH





(a) Apply battery voltage and check the operation of the mirror.
OK:





If the result is not as specified, replace the mirror assembly.





(b) For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror's movement.
OK:





- Disconnect and reconnect the battery between each mirror position check.
- Do not apply battery voltage when moving the mirror by hand into each mirror position.
If the result is not as specified, replace the mirror assembly.





(c) Check the mirror heater.
(1) Measure the resistance according to the value (s) in the table below.
Standard resistance:






If the result is not as specified, replace the mirror assembly.
(2) Apply battery voltage and check the operation of the mirror heater.
OK:





HINT: It will take a short time for the mirror to become warm.

If the result is not as specified, replace the mirror assembly.
2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH





(a) Apply battery voltage and check the operation of the mirror.
OK:





If the result is not as specified, replace the mirror assembly.





(b) For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror's movement.
OK:





- Disconnect and reconnect the battery between each mirror position check.
- Do not apply battery voltage when moving the mirror by hand into each mirror position.
If the result is not as specified, replace the mirror assembly.





(c) Check the mirror heater.
(1) Measure the resistance according to the value (s) in the table below.
Standard resistance:






If the result is not as specified, replace the mirror assembly.
(2) Apply battery voltage and check the operation of the mirror heater.
OK:





HINT: It will take a short time for the mirror to become warm.

If the result is not as specified, replace the mirror assembly.