Brake Fluid: Service and Repair

BRAKE: BRAKE FLUID: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT AND ADJUST FLUID LEVEL IN RESERVOIR





(a) Inspect the fluid level. If the brake fluid level is lower than the MIN line, inspect for brake fluid leakage and brake pad. After repair or replacement, adjust the brake fluid level in the reservoir as specified below.
Brake fluid:
SAE J1703 or FMVSS No. 116 DOT 3
NOTICE:
If using a dropper to adjust the fluid amount, make sure the dropper has not been used with mineral oils, water or deteriorated brake fluid. Sealed areas may deteriorate and lead to fluid leaks, or the fluid may deteriorate and lead to decreased efficiency.
(1) Add the brake fluid to the MAX line with the power switch on (IG).
NOTICE:
The brake fluid level must always be adjusted to the MAX line.