Removal

2UR-FSE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

REMOVAL
HINT: When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal
3. REMOVE NO. 1 AIR CLEANER INLET Removal
4. REMOVE AIR CLEANER ASSEMBLY LH Removal
5. REMOVE AIR CLEANER ASSEMBLY RH Removal
6. REMOVE VVT SENSOR





(a) Disconnect the 4 sensor connectors.
(b) Remove the 4 bolts and 4 sensors.