Operation CHARM: Car repair manuals for everyone.

Removal








2UR-FSE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING CONTROL MOTOR: REMOVAL

REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal
3. REMOVE NO. 1 AIR CLEANER INLET Removal
4. REMOVE INTAKE AIR CONNECTOR PIPE Removal
5. REMOVE CAM TIMING CONTROL WITH EDU MOTOR ASSEMBLY RH





(a) Disconnect the 2 camshaft timing control motor connectors.
(b) Remove the bolt and engine wire bracket.





(c) Remove the 3 bolts and camshaft timing control motor.
NOTICE:
Do not allow foreign matter to contact the oil seal face of the camshaft timing control motor (connecting surface with timing chain cover).

(d) Remove the O-ring from the timing chain cover.
6. REMOVE CAM TIMING CONTROL WITH EDU MOTOR ASSEMBLY LH





(a) Disconnect the 2 camshaft timing control motor connectors and wire harness clamp.





(b) Remove the 3 bolts and camshaft timing control motor.
NOTICE:
Do not allow foreign matter to contact the oil seal face of the camshaft timing control motor (connecting surface with timing chain cover).

(c) Remove the O-ring from the timing chain cover.