Removal

L110F HYBRID TRANSMISSION / TRANSAXLE: HYBRID MODE SELECT SWITCH: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
2. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire) Removal
3. REMOVE BATTERY SERVICE HOLE COVER LH Removal
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
- After the power switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. Therefore, after turning the power switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
6. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
8. REMOVE NO. 3 BOX PANEL Removal
9. REMOVE REAR UPPER CONSOLE PANEL Removal
10. REMOVE INSTRUMENT PANEL CUP HOLDER





(a) Disconnect the combination switch connector.





(b) Remove the 4 screws and instrument panel cup holder.
11. REMOVE COMBINATION SWITCH ASSEMBLY





(a) Detach the 4 claws and remove the combination switch assembly.