Installation

SUPPLEMENTAL RESTRAINT SYSTEM: SRS SEAT CUSHION AIRBAG ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL SRS SEAT CUSHION AIRBAG ASSEMBLY





(a) Install the cushion airbag.
(b) Install the wire harness clamp and connect the connector.
(c) Install the 3 bolts.
Torque: 20 Nm (204 kgf-cm, 15ft-lbf)
2. INSTALL REAR SEAT CUSHION ASSEMBLY RH Installation
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSTALL BATTERY SERVICE HOLE COVER LH Installation
5. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation
6. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation
7. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.