Rear Door Sunshade System

INTERIOR: REAR DOOR SUNSHADE SYSTEM: TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK REAR DOOR ECU LH





(a) Disconnect the O14 ECU connector.
(b) Measure the resistance and voltage according to the value(s) in the table below.





- If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the O14 ECU connectors.
(d) Measure the voltage according to the value(s) in the table below.





- If the result is not as specified, the ECU or door sunshade may have a malfunction.

2. CHECK REAR DOOR ECU RH





(a) Disconnect the O3 ECU connector.
(b) Measure the resistance and voltage according to the value(s) in the table below.





- If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the O3 ECU connectors.
(d) Measure the voltage according to the value(s) in the table below.





- If the result is not as specified, the ECU or door sunshade may have a malfunction.