Fail-Safe Chart

WIPER AND WASHER: WIPER AND WASHER SYSTEM: FAIL-SAFE CHART

FAIL-SAFE CHART

1. FRONT WIPER SYSTEM
(a) When the wiper switch is in any position other than "OFF" and the blades are frozen, a malfunction is detected by the passenger side junction block and the wiper operation is stopped.
HINT: Recovery condition: power switch OFF.

(b) When the rain sensor is broken and the wiper switch is in the AUTO position, the front wiper system is changed to the intermittent mode.
HINT: Recovery condition: Signal level error cancellation from rain sensor.

(c) When the rain sensor overheats and the front wiper is in the HI operation mode, the front wiper system is changed to the LO operation mode.
HINT: Recovery condition: power switch OFF or wiper operation signal is not INT and LO.

(d) When the Front Controller malfunctions, the front wiper system can be set to the HI operation mode with the combination switch only.
HINT: Recovery condition: Front Controller returns to normal.