Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the RH and LH side.
- The procedures listed below are for the LH side.

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH





(a) Attach the rear combination light with the 2 pins and install the light guide of the body side.





(b) Connect the connector.
2. INSTALL REAR LIGHT COVER LH
3. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE LH Reassembly
4. INSTALL REAR FLOOR FINISH SIDE PLATE LH Reassembly
5. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT Reassembly
6. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER LOWER Reassembly
7. INSTALL TONNEAU COVER ASSEMBLY Reassembly
8. INSTALL LUGGAGE COMPARTMENT TRIM REAR COVER SUB-ASSEMBLY Reassembly
9. INSTALL TOOL BOX COVER Reassembly
10. INSTALL SPARE TIRE
11. INSTALL SPARE WHEEL COVER ASSEMBLY
12. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH Reassembly
13. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH Reassembly
14. INSTALL LUGGAGE COMPARTMENT FLOOR MAT
15. INSTALL REAR FLOOR FINISH PLATE Reassembly
16. INSTALL TONNEAU COVER STOPPER SUB-ASSEMBLY LH Reassembly
17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
18. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.