Rear View Monitor System
PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING
HINT
Use these procedures to troubleshoot the rear view monitor system.
1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS
NEXT -- Continue to next step.
3. CHECK DTC OF NAVIGATION SYSTEM
(a) Refer to the DTC Check/Clear of the navigation system Navigation System (for DVD) for DVD, Navigation System (for HDD) for HDD).
Result:
B -- Go to NAVIGATION SYSTEM
A -- Continue to next step.
4. PROBLEM SYMPTOM CONFIRMATION
Result:
B -- Go to step 6
A -- Continue to next step.
5. SYMPTOM SIMULATION
NEXT -- Continue to next step.
6. CHECK IF SAME SYMPTOM OCCURS IN NAVIGATION SYSTEM
(a) Refer to the navigation system Problem Symptoms Table for DVD, Problem Symptoms Table for HDD).
Result:
B -- Go to NAVIGATION SYSTEM (FOLLOW THE NAVIGATION SYMPTOM CHART TO PERFORM TROUBLESHOOTING)
A -- Continue to next step.
7. PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table Intuitive Parking Assist System.
Result:
B -- Go to step 9
A -- Continue to next step.
8. BASED ON THE MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW
(a) Terminals of ECU Intuitive Parking Assist System
NEXT -- Continue to next step.
9. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
10. CONFIRMATION TEST
NEXT -- END