Installation

2GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket to the engine coolant temperature sensor.

(b) Install the engine coolant temperature sensor.





Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL NO. 1 AIR CLEANER INLET Installation

3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

5. INSTALL AIR CLEANER INLET ASSEMBLY Installation

6. ADD ENGINE COOLANT Testing and Inspection

7. CHECK FOR ENGINE COOLANT LEAKS Testing and Inspection

8. INSTALL ENGINE ROOM SIDE COVER LH Installation

9. INSTALL COOL AIR INTAKE DUCT SEAL Installation

10. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

11. INSTALL ENGINE UNDER COVER RH

12. INSTALL ENGINE UNDER COVER LH