Installation

ENGINE IMMOBILIZER: CERTIFICATION ECU: INSTALLATION

1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Engage the clamp.





(b) Install the certification ECU (smart key ECU assembly) with the 2 bolts.

(c) Connect the connectors.

2. INSTALL REAR ACCELERATION SENSOR ASSEMBLY Installation

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER RH Installation

4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Installation

5. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT Installation

6. INSTALL REAR FLOOR FINISH PLATE Installation

7. INSTALL TOOL BOX Installation

8. INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER LH Installation

9. INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER RH Installation

10. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. REGISTER ECU COMMUNICATION ID

NOTICE:
When replacing the certification ECU (smart key ECU assembly), perform initialization Engine Immobilizer System.

13. REGISTER KEY

NOTICE:
When replacing the certification ECU (smart key ECU assembly), perform initialization Engine Immobilizer System.