Installation

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL LUGGAGE COMPARTMENT DOORS STRIKER ASSEMBLY





(a) Connect the connector.

(b) Install the striker with the 2 bolts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER RH





(a) Install the trim cover with the 5 clips.

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER LH





(a) Install the trim cover with the 5 clips.

4. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT





(a) Attach the 4 claws to install the trim cover.

(b) Install the 3 clips.

(c) Attach the hook.





(d) Install the rope hook.





5. INSTALL REAR FLOOR FINISH PLATE





(a) Install the finish plate with the 4 clips.

(b) Install the 3 clips labeled A.

(c) Install the 2 bolts and 2 hooks on the both side.

6. INSTALL TOOL BOX





7. INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER LH





(a) Install the compartment trim side cover LH with the 2 clips.

8. INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER RH





9. INSTALL LUGGAGE COMPARTMENT FLOOR MAT





10. INSTALL LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY

11. INSTALL LICENSE PLATE LIGHT ASSEMBLY Installation

12. INSTALL REAR LIGHT ASSEMBLY Installation

13. INSTALL TELEVISION CAMERA ASSEMBLY Installation

14. INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY Installation

15. INSTALL REAR SPOILER SUB-ASSEMBLY Installation

16. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY





(a) Install the opening switch to the luggage compartment door with the 2 screws.

(b) Connect the connector.





17. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY





(a) Connect the connect.

(b) Install the lock cylinder with the 2 nuts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

18. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY





(a) Connect the connect.

(b) Install the door closer with the 2 bolts.

Torque : 5.5 Nm (56 kgf-cm, 48 in-lbf)

19. INSTALL LUGGAGE DOOR LOCK OPENER ASSEMBLY





(a) Install the door lock opener with the screw.

20. INSTALL LUGGAGE DOOR LOCK OPENER ASSEMBLY





(a) Install the cover with the 10 clips.

21. INSTALL DOOR INSIDE HANDLE BEZEL

(a) Attach the 4 claws to install the bezel.

22. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP





(a) Install the assist grip with the 2 screws.

(b) Attach the 4 claws to install the cover.





23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

24. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.