Only Passenger Door Lock / Unlock Functions Do Not Operate

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: Only Passenger Door LOCK / UNLOCK Functions do not Operate
- Only Passenger Door LOCK / UNLOCK Functions do not Operate

DESCRIPTION

The front multiplex network door ECU RH receives lock/unlock switch signals and activates the door lock motor according to the signals.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. PERFORM ACTIVE TEST USING TECHSTREAM (FRONT DOOR LOCK MOTOR)

(a) Select the ACTIVE TEST, use the Techstream to generate a control command, and the check that the door lock motor operates.





OK:

Door locks/unlocks.

OK -- REPLACE FRONT MULTIPLEX NETWORK DOOR ECU RH
NG -- Continue to next step.

2. INSPECT FRONT DOOR LOCK ASSEMBLY RH





(a) Apply battery voltage to the door lock motor and check operation of the door lock motor.

OK:





NG -- REPLACE FRONT DOOR LOCK ASSEMBLY RH
OK -- Continue to next step.

3. READ VALUE USING TECHSTREAM (DOOR LOCK POSITION SWITCH)

(a) Check the DATA LIST for proper functioning of the door lock position switch.

Front Multiplex Network Door ECU RH





OK:

ON (passenger side door is unlocked) appears on screen.

OK -- REPLACE FRONT MULTIPLEX NETWORK DOOR ECU RH
NG -- Continue to next step.

4. INSPECT FRONT DOOR LOCK ASSEMBLY RH (DOOR LOCK POSITION SWITCH)





(a) Measure the resistance of the switch.

Standard resistance:





NG -- REPLACE FRONT DOOR LOCK ASSEMBLY RH
OK -- Continue to next step.

5. CHECK WIRE HARNESS (ECU - DOOR LOCK)





(a) Disconnect the M3 ECU connector.

(b) Disconnect the M6 door lock connector.

(c) Measure the resistance of the wire harness side connectors.

Standard resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- REPLACE FRONT MULTIPLEX NETWORK DOOR ECU RH