Installation

BRAKE CONTROL: BRAKE CONTROL POWER SUPPLY: INSTALLATION

1. INSTALL BRAKE CONTROL POWER SUPPLY ASSEMBLY

(a) Install the 2 brackets with the 4 bolts.

Torque : 13.5 Nm (138 kgf-cm, 10 ft-lbf)

(b) Install the brake control power supply with the 3 nuts.





Torque : 17 Nm (173 kgf-cm, 13 ft-lbf)

(c) Connect the connector to the brake control power supply.

2. INSTALL SIDE LUGGAGE COMPARTMENT TRIM COVER RH

(a) Install the trim cover with the 2 clips.

(b) Install the rope hook with the bolt.

3. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

(a) Install the trim cover with the 4 clips.

4. INSTALL LUGGAGE COMPARTMENT NO. 2 TRIM HOOK

(a) Install the 2 trim hooks.

5. INSTALL ROPE HOOK

(a) Install the 2 rope hooks.

6. INSTALL REAR FLOOR FINISH PLATE

(a) Install the finish plate with the 3 clips.

7. INSTALL ROPE HOOK ASSEMBLY

(a) Install the 2 rope hooks with the 2 bolts.

8. INSTALL LUGGAGE COMPARTMENT NO. 1 TRIM COVER

(a) Install the trim cover.

9. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

(a) Install the floor mat.

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

11. CHECK AND CLEAR DTC

(a) Check and clear the DTCs Reading and Clearing Diagnostic Trouble Codes.