Removal

2GR-FSE EMISSION CONTROL: AIR FUEL RATIO SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE SERVICE PLUG GRIP Removal

3. REMOVE INVERTER WITH CONVERTER

(a) Remove the inverter with converter Removal.

4. REMOVE POWER STEERING ECU ASSEMBLY

(a) Remove the power steering ECU Removal.

5. REMOVE FRONT EXHAUST PIPE ASSEMBLY

(a) Remove the front exhaust pipe Removal.

6. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH Removal

7. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH Removal

8. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

(a) Using SST, remove the sensor from the exhaust manifold RH.





SST : 09224-00010

9. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

(a) Using SST, remove the sensor from the exhaust manifold LH.





SST : 09224-00010