Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal

3. REMOVE CONSOLE UPPER PANEL ASSEMBLY Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

6. REMOVE CONSOLE BOX PLATE Removal

7. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal

8. REMOVE CONSOLE BOX ASSEMBLY Removal

9. REMOVE CENTER AIRBAG SENSOR ASSEMBLY

(a) Disconnect the holder (with connectors).





(b) Remove the nut, 2 bolts and center airbag sensor.