Installation

BRAKE CONTROL: STEERING ANGLE SENSOR: INSTALLATION

1. INSTALL STEERING ANGLE SENSOR

(a) Align the locating pins, attach the 6 claws and install the sensor to the spiral cable.





2. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR Installation

3. INSTALL STEERING COLUMN COVER Installation

4. CENTER SPIRAL CABLE Installation

5. INSTALL STEERING WHEEL ASSEMBLY Installation

6. INSTALL STEERING WHEEL PAD Installation

7. INSPECT STEERING WHEEL CENTER POINT

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
* When reconnecting the cable to the negative (-) battery terminal after installing the steering angle sensor, check that the front tires and steering wheel are kept aligned straight ahead before and after connecting the cable to the negative (-) battery terminal.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
9. CHECK STEERING WHEEL PAD Installation

10. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.