Removal

2GR-FSE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE SERVICE PLUG GRIP Removal

3. REMOVE COOL AIR INTAKE DUCT SEAL Removal

4. REMOVE V-BANK COVER Removal

5. REMOVE NO. 1 AIR CLEANER INLET Removal

6. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair

7. REMOVE ENGINE UNDER COVER

8. REMOVE REAR ENGINE UNDER COVER LH

9. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE Removal

10. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE Removal

11. REMOVE ELECTRIC INVERTER COMPRESSOR Removal

12. REMOVE CRANKSHAFT POSITION SENSOR

(a) Disconnect the sensor connector.





(b) Remove the bolt and sensor.