Removal

SUSPENSION CONTROL: ABSORBER CONTROL SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal

3. REMOVE CONSOLE UPPER PANEL ASSEMBLY Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

6. REMOVE CONSOLE BOX PLATE Removal

7. REMOVE ABSORBER CONTROL SWITCH





(a) Detach the 2 claws and remove the absorber control switch from the console box plate.