Power Locks: Description and Operation

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: SYSTEM DIAGRAM





Communication table:









SYSTEM DESCRIPTION

1. POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION

(a) The power door lock system locks / unlocks all doors.

* The door control switch of the multiplex network master switch and the driver door key cylinder use the BEAN line to send lock / unlock request signals through the multiplex network master switch to the multiplex network body ECU.

* The door control switch on the passenger door uses the BEAN line to send lock / unlock request signals through the multiplex network body ECU to the cowl side junction block RH ECU.

* Upon receiving request signals, the multiplex network body ECU sends these signals to the door ECUs on each door using the BEAN. The door ECUs then lock / unlock each door.

2. FUNCTION OF MAIN COMPONENT





3. SYSTEM DESCRIPTION

The door control system has the following functions:





HINT
*1: Default setting of Korea and Taiwan are OFF.

*2: Default setting of Taiwan is OFF.

*3: Default setting of Korea and Taiwan are ON.