Reassembly

SLIDING ROOF: SLIDING ROOF HOUSING: REASSEMBLY

1. INSTALL ROOF WIND DEFLECTOR PANEL ASSEMBLY

(a) Attach the 2 claws and install the wind deflector panel.

2. INSTALL SLIDING ROOF DRIVE CABLE ASSEMBLY





(a) Using a screwdriver, slide the drive cable in the direction indicated by the arrow in the illustration to install it.

HINT
Tape the screwdriver tip before use.

(b) Attach the 2 claws and install the drip channel.

(c) Install the sliding roof piece LH and RH with the 2 screws.

(d) Install the 2 sliding roof side stoppers with the 2 screws.

3. ADJUST SLIDING ROOF DRIVE CABLE ASSEMBLY





(a) Using a screwdriver, align the matchmarks by sliding the drive cable in the direction indicated by the arrow in the illustration.

HINT
Tape the screwdriver tip before use.

4. INSTALL SUNSHADE TRIM ASSEMBLY

5. INSTALL SLIDING ROOF DRIVE GEAR ASSEMBLY

(a) Install the drive gear with the 2 bolts.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(b) Attach the bracket's claw to install the bracket.