Installation

SEAT: FRONT POWER SEAT LUMBAR SWITCH: INSTALLATION

HINT
* Use the same procedures for the LH and RH side.
* A bolt without a torque specification is shown in the standard bolt chart. Standard Bolt - Specified Torque For Standard Bolts
1. INSTALL FRONT POWER SEAT LUMBAR SWITCH

(a) Install the switch to the front cushion shield with the 2 screws.

2. INSTALL FRONT SEAT CUSHION SHIELD WITH NO. 1 CUSHION SHIELD INNER Reassembly

3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

4. INSTALL RECLINING POWER SEAT SWITCH KNOB

5. INSTALL FRONT SEAT ASSEMBLY Installation

6. INSTALL FRONT SEAT TRACK REAR INNER COVER Installation

7. INSTALL FRONT SEAT TRACK REAR OUTER COVER Installation

8. INSTALL FRONT SEAT TRACK BRACKET COVER Installation

9. CONNECT FRONT SEAT OUTER BELT ASSEMBLY Installation

10. INSTALL SEAT BELT ANCHOR COVER CAP Installation

11. INSPECT FRONT SEAT ASSEMBLY Installation

12. INSPECT SRS WARNING LIGHT

Inspect SRS warning light Diagnosis System.