Removal

BRAKE CONTROL: BRAKE CONTROL POWER SUPPLY: REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

(a) Remove the luggage compartment floor mat.

3. REMOVE LUGGAGE COMPARTMENT TRIM NO.1 COVER

(a) Remove the luggage compartment trim cover No.1

4. REMOVE ROPE HOOK ASSEMBLY

(a) Remove the bolt and rope hook assembly

5. REMOVE REAR FLOOR FINISH PLATE

(a) Remove the 3 clips and rear floor finish plate.

6. REMOVE ROPE HOOK

(a) Remove the 2 rope hooks.

7. REMOVE LUGGAGE COMPARTMENT TRIM NO.2 HOOK

(a) Remove the 2 luggage compartment trim No.2 hooks.

8. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT

(a) Remove the clip and luggage compartment trim cover front.

9. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH

(a) Remove the rope hook assembly.

(b) Remove the clip and luggage compartment trim cover side RH.

10. REMOVE BRAKE CONTROL POWER SUPPLY ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 3 nuts and the brake control power supply assembly.