Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH





(a) Install the switch with the 2 screws.

Torque : 1.7 to 3.0 Nm (17 to 31 kgf-cm, 15 to 27 in-lbf)

(b) Connect the connector.

2. INSTALL STEERING WHEEL ASSEMBLY

For 2GR-FSE Installation

For 1UR-FSE Installation

3. INSTALL STEERING WHEEL PAD Installation

4. INSTALL STEERING WHEEL NO. 3 COVER LOWER

5. INSTALL STEERING WHEEL NO. 2 COVER LOWER

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. PERFORM INITIALIZATION

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

Perform initialization Repair Instruction - Initialization.

8. CHECK SRS WARNING LIGHT

Check the SRS warning light Diagnosis System.