Removal

LIGHTING: FOG LIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE FRONT BUMPER ASSEMBLY Removal

4. REMOVE FOG LIGHT ASSEMBLY





(a) Remove the bolt.

(b) Detach the 2 claws and remove the fog light.

5. REMOVE FOG LIGHT BULB





(a) Turn the fog light bulb in the direction indicated by the arrow and remove it.