Installation

LIGHTING: HIGH INTENSITY DISCHARGE HEADLIGHT BULB: INSTALLATION

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.
1. INSTALL HIGH-INTENSITY DISCHARGE HEADLIGHT BULB Installation

2. INSTALL HEADLIGHT NO. 1 BACK COVER Installation

3. INSTALL ENGINE ROOM SIDE COVER Installation

4. INSTALL COOL AIR INTAKE DUCT SEAL Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.