Removal

LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE LUGGAGE COMPARTMENT DOOR COVER Removal

3. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE

4. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY





(a) Disconnect the connector.

(b) Remove the 2 screws and switch from the luggage compartment door.

5. REMOVE LICENSE PLATE LIGHT ASSEMBLY





(a) Disconnect the connector.





(b) Remove the 2 screws and license plate light from luggage compartment door.

6. REMOVE BACK DOOR GARNISH RETAINER SUB-ASSEMBLY





(a) Remove the 2 screws.

(b) Remove the 2 clips and retainer from the luggage compartment door.