Installation

1UR-FSE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

1. INSTALL V-RIBBED BELT

(a) Install the V-ribbed belt as shown in the illustration.





NOTICE:
Check that the drive belt is properly set to each pulley.

(1) Rotate the V-ribbed belt tensioner pulley counterclockwise, and then remove the bar.

2. INSTALL RADIATOR RESERVE TANK ASSEMBLY

(a) Install the radiator reserve tank assembly with the 2 bolts.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

3. INSTALL NO. 1 AIR CLEANER INLET Installation

4. INSTALL COOL AIR INTAKE DUCT SEAL Installation