Installation

1UR-FSE STARTING: ENGINE SWITCH: INSTALLATION

1. INSTALL ENGINE SWITCH

(a) Attach the 2 claws to install the switch.





(b) Connect the switch connector.

2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation

3. INSTALL INSTRUMENT PANEL NO. 1 SAFETY PAD SUB-ASSEMBLY Installation

4. INSTALL INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT SIDE PANEL LH Installation

6. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation

7. INSTALL FRONT DOOR SCUFF PLATE LH Installation

8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

9. INSTALL CONSOLE UPPER PANEL ASSEMBLY Installation

10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. PERFORM INITIALIZATION

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

13. CHECK SRS WARNING LIGHT

Diagnosis System