Removal

SUSPENSION: FRONT STABILIZER BAR (for 2WD): REMOVAL

1. REMOVE FRONT WHEEL

2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

(a) Remove the 2 nuts and the front stabilizer link assembly LH.





HINT
If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.

3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT
Remove the RH side following the same procedures as with the LH side.

4. REMOVE ENGINE UNDER COVER REAR LH

(a) Remove the bolt and engine under cover LH.





5. REMOVE ENGINE UNDER COVER REAR RH

HINT
Remove the RH side following the same procedures as with the LH side.

6. REMOVE FRONT STABILIZER NO.2 BRACKET LH

(a) Remove the 2 bolts and the front stabilizer No.2 bracket LH from the front suspension crossmember.





7. REMOVE FRONT STABILIZER NO.2 BRACKET RH

HINT
Remove the RH side following the same procedures as with the LH side.

8. REMOVE FRONT STABILIZER NO.1 BRACKET LH

(a) Remove the 4 bolts and the front stabilizer No.1 bracket LH from the frame.





9. REMOVE FRONT STABILIZER NO.1 BRACKET RH

HINT
Remove the RH side following the same procedures as with the LH side.

10. REMOVE FRONT STABILIZER BAR NO.1 BUSH

(a) Remove the 2 front stabilizer bar No.1 bush from the front stabilizer bar.

11. REMOVE FRONT STABILIZER BAR

(a) Remove the front stabilizer bar from the vehicle.