Installation

WIPER AND WASHER: WIPER SWITCH: INSTALLATION

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY





(a) Attach the claw and install the wiper switch.

(b) Connect the connector.

2. INSTALL SPIRAL CABLE WITH STEERING SENSOR Installation

3. INSTALL STEERING COLUMN COVER Installation

4. ADJUST SPIRAL CABLE WITH STEERING SENSOR Installation

5. INSTALL STEERING WHEEL ASSEMBLY Installation

6. INSPECT STEERING WHEEL CENTER POINT

7. INSTALL STEERING PAD Installation

8. INSTALL NO. 3 STEERING WHEEL COVER LOWER

9. INSTALL NO. 2 STEERING WHEEL COVER LOWER

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

11. INSPECT STEERING PAD Installation

12. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

13. INSPECT SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.