Engine Control: SFI System

2AZ-FXE ENGINE CONTROL: SFI SYSTEM: U0293: Lost Communication with HV ECU
U0293 - Lost Communication with HV ECU

MONITOR DESCRIPTION

The ECM (included in hybrid vehicle control ECU) and the hybrid vehicle control ECU are located inside the hybrid vehicle control ECU. The engine control unit communicates with the hybrid vehicle control ECU through the controller Area Network (CAN).

If there is a communication problem, the hybrid vehicle control ECU sets a DTC.





MONITOR STRATEGY





TYPICAL ENABLING CONDITIONS





TYPICAL MALFUNCTION THRESHOLDS





CONFIRMATION DRIVING PATTERN





* Connect the Techstream to the DLC3.

* Turn the power switch on (IG) and turn the Techstream on.

* Clear the DTCs DTC Check / Clear.

* Turn the power switch off and wait for at least 30 seconds.

* Turn the power switch on (IG) and turn the Techstream on.

* Wait 5 seconds or more [A].

* Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

* Check for DTCs [B].

HINT
* If a DTC is output, the system is malfunctioning.
* If a DTC is not output, perform the following procedure.
* Enter the following menus: Powertrain / Engine and ECT / Utility / All Readiness.

* Input the DTC: U0293.

* Check the DTC judgment result.





HINT
If the judgment result shows ABNORMAL, the system has a malfunction.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC OUTPUT (IN ADDITION TO DTC U0293)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

(e) Check for DTCs.

Result:





HINT
If any DTCs other than U0293 are output, troubleshoot those DTCs first.

B -- GO TO DTC CHART SFI System

A -- REPLACE HYBRID VEHICLE CONTROL ECU Removal