Installation

THEFT DETERRENT / KEYLESS ENTRY: ENTRY LOCK AND UNLOCK SWITCH: INSTALLATION

1. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY

(a) Insert the front end of the front door outside handle assembly into the front door outside handle frame.





(b) Insert the rear end of the front door outside handle assembly into the front door outside handle frame, then slide the front door outside handle assembly toward the front of the vehicle to install it.

(c) Move the lever back in the direction indicated by the arrow in the illustration to lock the door outside handle assembly.





(d) Connect the connector.

(e) Engage the 2 claws.

2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) Reassembly

3. INSTALL FRONT DOOR OUTSIDE HANDLE COVER WITH LOCK CYLINDER ASSEMBLY (for Driver Side) Reassembly

4. INSTALL FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY Reassembly

5. INSTALL FRONT DOOR GLASS RUN Reassembly

6. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY Reassembly

7. INSTALL FRONT DOOR SERVICE HOLE COVER Reassembly

8. INSTALL FRONT DOOR ARMREST SET BRACKET Reassembly

9. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY (w/ Memory) Installation

10. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly

11. INSTALL NO. 1 FRONT DOOR STIFFENER CUSHION Reassembly

12. INSTALL COURTESY LIGHT ASSEMBLY Installation

13. INSTALL DOOR ARMREST COVER Reassembly

14. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Reassembly

15. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Installation

16. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG Reassembly

17. INITIALIZE POWER WINDOW CONTROL SYSTEM

Initialization

18. CHECK POWER WINDOW CONTROL SYSTEM

Operation Check