Black Screen

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Black Screen
- Black Screen

INSPECTION PROCEDURE

PROCEDURE

1. CHECK DISPLAY SETTING

(a) Check that the display is not in "Screen OFF" mode.

OK:

The display setting is not in "Screen OFF" mode.

NG -- CHANGE SCREEN TO "SCREEN ON" MODE
OK -- Continue to next step.

2. CHECK IMAGE QUALITY SETTING

(a) Press the "DISP" switch on the remote touch.





(b) Check that the screen color quality can be set.

OK:

Setting is possible.

Text in Illustration





NG -- CHECK CABIN

OK -- SET SCREEN COLOR QUALITY TO NORMAL

3. CHECK CABIN

(a) Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.

HINT
* A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may cause a short circuit.
* The navigation system may not operate normally when the temperature is -20°C (-4°F) or lower, or 65°C (149°F) or higher.

OK:

Condensation is not likely being produced and the temperature is not high or extremely low.

NG -- SET CABIN TO APPROPRIATE TEMPERATURE

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table