Luggage Compartment Door: Adjustment

DOOR / HATCH: LUGGAGE COMPARTMENT DOOR: ADJUSTMENT





Text in Illustration





HINT
* Centering bolts are used to mount the door hinge to the vehicle body and door. The door cannot be adjusted with the centering bolts on. Substitute the centering bolts with standard bolts when making adjustments.
* A bolt without a torque specification is shown in the standard bolt chart Specified Torque For Standard Bolts.
1. INSPECT LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY

(a) Check that the clearance measurements of areas *a to *j are within each standard range.





Standard Clearance





2. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Removal

3. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

4. REMOVE LUGGAGE COMPARTMENT DOOR COVER Removal

5. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH Disassembly

6. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH Disassembly

7. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

8. REMOVE TOOL WITH STAY BOX SUB-ASSEMBLY

9. REMOVE REAR FLOOR FINISH PLATE Removal

10. ADJUST LUGGAGE COMPARTMENT DOOR

(a) Horizontally and vertically adjust the door by loosening the door side hinge bolts.





Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)

(b) Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic hammer.





(c) Tighten the striker mounting screws after the adjustment.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

11. INSTALL REAR FLOOR FINISH PLATE Installation

12. INSTALL TOOL WITH STAY BOX SUB-ASSEMBLY

13. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation

14. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH Reassembly

15. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH Reassembly

16. INSTALL LUGGAGE COMPARTMENT DOOR COVER Installation

17. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Installation

18. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

HINT
Use the same procedure as for the LH side.