Installation

SEAT: REAR SEAT ASSEMBLY: INSTALLATION

1. INSTALL REAR SEATBACK ASSEMBLY

(a) Place the rear seatback assembly in the cabin.

(b) Engage the 3 hooks as shown in the illustration.





NOTICE:
Be careful not to damage the vehicle body.

(c) Install the rear seatback assembly with the 4 bolts.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

(d) Pass the seat belt through the rear seat shoulder belt guide RH.

(e) Engage the claw and close the cap of the rear seat shoulder belt guide RH.





(f) Pass the seat belt through the rear seat center shoulder belt guide.

(g) Engage the claw and close the cap of the rear seat center shoulder belt guide.





(h) Pass the seat belt through the rear seat shoulder belt guide LH.

(i) Engage the claw and close the cap of the rear seat shoulder belt guide LH.





2. INSTALL REAR SEAT HEADREST ASSEMBLY RH

(a) Install the rear seat headrest assembly RH as shown in the illustration.





3. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

(a) Install the rear seat center headrest assembly as shown in the illustration.





4. INSTALL REAR SEAT HEADREST ASSEMBLY LH

(a) Install the rear seat headrest assembly LH as shown in the illustration.





5. INSTALL REAR SEAT CUSHION LOCK HOOK

(a) Engage the 4 claws to install 2 new rear seat cushion lock hooks as shown in the illustration.





6. INSTALL REAR SEAT CUSHION ASSEMBLY

(a) Engage the 2 guides.





Text in Illustration





(b) Engage the 2 front hooks of the seat cushion to the vehicle body as shown in the illustration.

(c) Confirm that the seat cushion is firmly installed.

NOTICE:
When installing the seat cushion, make sure that the seat belt buckles are not under the seat cushion.