Disassembly

HEATING / AIR CONDITIONING: BLOWER UNIT (for Front Side): DISASSEMBLY

1. REMOVE AIR INLET CONTROL SERVO MOTOR SUB-ASSEMBLY

(a) Remove the 2 screws and air inlet control servo motor sub-assembly.





2. REMOVE AIR FILTER CASE

(a) Disengage the claw and guide, and remove the air filter case as shown in the illustration.





3. REMOVE CLEAN AIR FILTER

(a) Remove the clean air filter as shown in the illustration.





4. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY

(a) Remove the 3 screws and front blower motor sub-assembly.





NOTICE:
Do not remove the front blower motor sub-assembly if it has been damaged or impacted.