Installation
HEATING / AIR CONDITIONING: BLOWER UNIT (for Rear Side): INSTALLATION
1. INSTALL COOLER BLOWER ASSEMBLY
(a) Connect the connector and install the cooler blower assembly.
(b) Engage the clamp.
2. SET NO. 1 CONSOLE BOX MOUNTING BRACKET
(a) Temporarily install the No. 1 console box mounting bracket with the 7 bolts as shown in the illustration.
(b) Install the cooler blower assembly with the 3 bolts to the No. 1 console box mounting bracket.
Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)
HINT
Tighten the bolts in the order shown in the illustration to install the cooler blower assembly.
3. INSTALL NO. 4 CONSOLE BOX DUCT
(a) Install the No. 4 console box duct as shown in the illustration.
(b) Install the 2 screws to the No. 4 console box duct.
4. INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET Installation
5. INSTALL CONSOLE BOX Installation
6. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation
7. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation
8. INSTALL INSTRUMENT SIDE PANEL RH Installation
9. INSTALL COWL SIDE TRIM BOARD RH
HINT
Use the same procedure for the RH side and LH side Installation.
10. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
11. INSTALL FRONT DOOR OPENING TRIM COVER RH
HINT
Use the same procedure for the RH side and LH side Installation.
12. INSTALL FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and LH side Installation.
13. INSTALL CONSOLE BOX RH Installation
14. INSTALL CONSOLE BOX LH Installation
15. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (w/o Navigation System) Installation
16. INSTALL REMOTE TOUCH ASSEMBLY (w/ Navigation System) Installation
17. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation
18. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
19. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY Installation
20. INSTALL CONSOLE BOX CARPET Installation
21. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY Installation
22. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (w/o Seat Heater System) Installation
23. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (w/ Seat Heater System) Installation
24. INSTALL FRONT CONSOLE BOX COVER Installation
25. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation
26. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation