Disassembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: DISASSEMBLY

1. REMOVE REAR TURN SIGNAL LIGHT BULB

(a) Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and remove them as a unit.





(b) Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

2. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

(a) Disengage the clamp.





(b) Disconnect the connector and remove the rear combination light socket and wire sub-assembly.

3. REMOVE REAR BUMPER SIDE SUPPORT

(a) Using a screwdriver, disengage the 2 claws and remove the rear bumper side support.