Removal

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REMOVAL

1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

2. REMOVE TOOL WITH STAY BOX SUB-ASSEMBLY

3. REMOVE REAR FLOOR FINISH PLATE

(a) Using a clip remover, remove the 3 clips.





(b) Disengage the 4 clips and 2 guides, and remove the rear floor finish plate.

4. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Removal

5. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

(a) Remove the 2 No. 2 luggage compartment trim hooks as shown in the illustration.





(b) Disengage the 4 claws (A).





(c) Disengage the 2 claws (B).

(d) Disengage the 4 fasteners and remove the front luggage compartment trim cover.

6. REMOVE ROPE HOOK

(a) Disengage the 2 claws and remove the rope hook as shown in the illustration.





7. REMOVE INNER LUGGAGE COMPARTMENT TRIM COVER

(a) Using a clip remover, remove the 3 clips and inner luggage compartment trim cover.





8. REMOVE REAR BUMPER ASSEMBLY

(a) Remove the rear bumper assembly Removal.

9. REMOVE REAR LIGHT COVER

(a) Using a screwdriver with its tip wrapped with protective tape, disengage the 6 claws and remove the 2 rear light covers.





10. REMOVE REAR COMBINATION LIGHT ASSEMBLY

(a) Turn the lower back door stopper cushion in the direction indicated by the arrow shown in the illustration, and remove it.





(b) Disconnect the connector.





(c) Disengage the grommet.

(d) Remove the 3 screws.

(e) Disengage the 2 pins and remove the rear combination light assembly.