Reassembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY

1. INSTALL REAR BUMPER SIDE SUPPORT

(a) Engage the 2 claws and install the rear bumper side support.





2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

(a) Connect the connector.





(b) Engage the clamp and install the rear combination light socket and wire sub-assembly.

3. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.

(b) Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration to install them as a unit.