Installation

LIGHTING (INT): REAR DOOR COURTESY SWITCH: INSTALLATION

1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

(a) Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the connector.

2. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY Installation

3. INSTALL REAR SEATBACK ASSEMBLY Installation

4. INSTALL REAR SEAT HEADREST ASSEMBLY RH Installation

5. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY Installation

6. INSTALL REAR SEAT HEADREST ASSEMBLY LH Installation

7. INSTALL REAR SEAT CUSHION LOCK HOOK Installation

8. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

9. INSTALL REAR DOOR SCUFF PLATE Installation

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation

11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation

12. PERFORM DIAGNOSTIC SYSTEM CHECK

(a) Perform a diagnostic system check DTC Check / Clear.

13. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.