Engine

MAINTENANCE: ENGINE: GENERAL MAINTENANCE

HINT
Perform these procedures after the engine has cooled down.

1. INSPECT DRIVE BELT

(a) Check the drive belt Testing and Inspection.

2. INSPECT VALVE CLEARANCE

(a) Check the valve clearance Testing and Inspection.

3. REPLACE ENGINE OIL AND OIL FILTER

(a) Check the engine oil and oil filter Replacement.

4. REPLACE ENGINE COOLANT

(a) Check the engine coolant Service and Repair.

5. INSPECT SPARK PLUGS

(a) Check the spark plugs Testing and Inspection.

6. INSPECT BATTERY

(a) Check the battery Testing and Inspection.

7. INSPECT AIR CLEANER FILTER ELEMENT

(a) Remove the air filter.

(b) Check that the air cleaner is not excessively dirty.





(c) If the air cleaner is excessively dirty, replace the air cleaner filter element.

(d) If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.

(e) Reinstall the air filter.

8. INSPECT EXHAUST PIPES AND MOUNTINGS

(a) Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.

9. INSPECT FUEL TANK CAP GASKET

(a) Check the fuel tank cap gasket Testing and Inspection.

10. INSPECT FUEL LINES, CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS

(a) Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.

(b) Check for tank band looseness or deformation.

11. INSPECT CHARCOAL CANISTER

(a) Check the charcoal canister Testing and Inspection.