Part 3

NETWORKING: CAN COMMUNICATION SYSTEM: TERMINALS OF ECU

22. YAW RATE SENSOR

(a) Disconnect the yaw rate sensor connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





23. PARKING ASSIST ECU (w/ Wide View Front Monitor System)





(a) Disconnect the parking assist ECU connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





24. CLEARANCE WARNING ECU (w/ Intuitive Parking Assist System

(a) Disconnect the clearance warning ECU connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





25. AIR CONDITIONING AMPLIFIER





(a) Disconnect the air conditioning amplifier connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





26. TIRE PRESSURE MONITOR ECU

(a) Disconnect the tire pressure monitor ECU connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





27. FRONT POWER SEAT SWITCH LH (w/ Seat Position Memory)





(a) Disconnect the connectors of the front power seat switch LH.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





28. MULTIPLEX TILT AND TELESCOPIC ECU (w/ Seat Position Memory)

(a) Disconnect the multiplex tilt and telescopic ECU connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





29. OUTER MIRROR CONTROL ECU LH (w/ Seat Position Memory)





(a) Disconnect the outer mirror control ECU LH connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





30. OUTER MIRROR CONTROL ECU RH (w/ Seat Position Memory )





(a) Disconnect the outer mirror control ECU RH connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





31. MILLIMETER WAVE RADAR SENSOR (w/ Dynamic Radar Cruise Control System)

(a) Disconnect the millimeter wave radar sensor connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





32. LANE RECOGNITION CAMERA SENSOR (w/ Lane-keeping Assist System)





(a) Disconnect the lane recognition camera sensor connector.

Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





33. DRIVER MONITOR ECU (w/ Driver Monitor System)

(a) Disconnect the driver monitor ECU connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance: