Installation

2AZ-FXE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR

(a) Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.

(b) Install the crankshaft position sensor with the bolt.





Text in Illustration





Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

(c) Connect the crankshaft position sensor connector.

2. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY Installation

3. INSTALL V-RIBBED BELT

(a) Install the V-ribbed belt Installation.

4. INSTALL ELECTRIC INVERTER COMPRESSOR

(a) Install the electric inverter compressor Installation.